Description
Active Cladding Alignment
Ilsintech Swift KF4 adalah splicer fusi penyelarasan kelongsong aktif yang sangat fleksibel dan super akurat yang memenuhi setiap aspek persyaratan penyambungan. Dengan ramping, namun kokoh dan sangat ringan, Swift KF4 dengan harga terjangkau memastikan pengguna akan proses yang nyaman dan stabil serta kinerja tinggi
- ROTATING BLADE LIFE UP TO 110,000
- Broadband and FTTH network application
- MAXIMUM versatility
- MINIMUM size & weight – world’s most compact active V-Groove fusion splicer
- OPTIMUM economy – The best quality, budget priced – make every penny count!
- Active V-Groove Alignment / Metro, Access Network and FTTH & Universal Fiber Holders
- Compatible with Fusion Splice-on Connector (SOC) in accordance with industry standards.
Category | Description |
Fiber alignment | IPAAS, Active V-Groove Alignment |
Applicable type of fibers | 0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable |
Fiber count | Single fiber |
Applicable fiber dimensions | Cladding diameter: 125μm, Coating diameter: 150μm~3mm |
Fiber setting and cleaved length | 0.20in to 0.63in |
Splicing modes | Splice mode: 300, Heat mode: 100 |
Typical splice Loss | SM: 0.02dB, MM: 0.01dB, DS: 0.04dB, NZDS: 0.04dB |
Return loss | > 60dB |
Splicing time | Typical 7sec with SM |
Sleeve heating time | Typical 13sec with IS-60 mode, IS-60 sleeve |
Applicable protection sleeve | 2.4in, 1.5in and micro sleeves |
Storage of splice result | Data: 5,000ea up to, Image: 5,000ea up to |
Tension test | 1.96N to 2.25N |
Operating condition | Altitude: 0~5,000m above sea level, Temperature: -14°F~122°F, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof |
Storage condition | Temperature: 40°F~176°F, Humidity: 0~95% |
Dimension | 4.9(W) x 7.4(L) x 3.0(H)in (without rubber protector) |
Weight | 5.3lb (including battery) |
Viewing method and display | 2 AXIS Two CMOS cameras with 4.3-inch color LCD monitor |
Fiber view and magnification | X/Y: 130X , Max: 260X |
Power supply | Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC charger |
No. of splice cycles with battery | Typical 200 cycles |
Electrode life | 38,000 splices |
Blade life | Up to 77,000 + 33,000 fibers (when increasing blade height by 0.12mm) |
Terminals | USB
|
Paket Standard
Category | Model | Q’ty |
Arc Fusion Splicer | SWIFT KF4 | 1 |
Battery Adapter | KF-3400 | 1 |
Instructions for use | FY1701000 | 1 |
Spare electrode | EI-24 | 1 pair |
Transporting Case | Hard Case | 1 |
Cooling Tray | CT-01(1.5in) | 1 |
Screwdriver | LD-3300 | 1 |
USB Cable | – | 1 |
Cleaver | CS-01BT | 1 |
Manual Stripper | CF-02 | 1 |
Alcohol Dispenser | PP | 1 |
Opsional
Category | Model |
Battery Pack | KF-3400 |
Cleaver Blade | BI-07 |
Electrode | EI-24 |
Transporting Case | HC-11(Hard Case) |
Work Belt | WB-01 |
Work Table | WK-02 |
Sleeve | S09-C, S09, S30-C, S30 |
Sleeve clamp | SC-01 |
SOC connector | SC, LC, FC, ST(Refer to FTTx Solution catalogue) |
Alcohol Dispenser | POM |
External Power | DC 12V Available for car cigar jack |
Optical fiber holder | HS-250, HS-900, HS-2.5, HS-IN, KF4-SC/FC, KF4-ST, KF4-ILC, LS-900 (choose one) |
Additional Information
Weight : 8 kg
Reviews
There are no reviews yet.